Need to pull serious water volume from a deep well every day — and you can’t afford the pump going dark when the sun does? The Hybsun 4UPH2200-105-15H hybrid solar well pump is a 2200 W high-flow submersible pump that delivers up to 15 m³/h (3963 GPH) at a maximum head of 105 m. The hybrid controller switches automatically between solar PV and 230 V grid AC, so the pump runs whenever it’s needed — and you get GPRS remote control plus anti-theft Child Lock as standard. PV array sized at ≥ 2860 Wp.
✓ VAT included · Delivery in Cyprus
What It Is
The Hybsun 4UPH2200-105-15H hybrid solar well pump is the high-flow workhorse of the Hybsun well pump range. At 2200 W rated power it delivers up to 15 m³/h of water from boreholes up to 105 m deep — and unlike the DC-only 3UP pumps, the hybrid controller switches automatically between solar PV and 230 V grid AC, so the pump runs day or night, sunny or cloudy. This is the right pump for serious agricultural operations, hotels and commercial water supply where pump downtime simply isn’t an option.
Motor Technology
DC Brushless permanent-magnet synchronous motor
Inside the Hybsun 4UPH2200-105-15H hybrid solar well pump is a ACDC Brushless permanent-magnet synchronous motor — built for high-speed, high-efficiency operation from a solar PV array or 230 V grid AC. The motor rotates on NSK Japanese-brand bearings — the same bearings used across industrial-duty pumping equipment worldwide — sealed by an alloy mechanical seal. For commercial sites running the pump 8+ hours a day, this combination is what delivers years of reliable service. The motor coil is wound on an automatic winding machine using centralized winding technology — Hybsun cites this as the reason for the improved motor efficiency on the 4UPH series. The double-seal water barrier keeps the unit fully sealed against ingress through years of submerged operation.
The hybrid controller is the brain of the system — it sits between your PV array, your grid AC supply and the pump, and decides in real time which power source to use. When solar power is enough to run the pump, it uses solar. When solar drops below the threshold (clouds, sunset, winter), it switches automatically to grid AC and keeps the pump running. It tracks the maximum power point of your solar array (MPPT), handles up to 17 A maximum input current, runs in an IP65 waterproof enclosure, and works across a wide voltage range: AC input 80-300 V single phase, DC input 90-430 V.
The 4UPH controller carries several smart features that DC-only controllers don’t have — particularly valuable for remote, unattended agricultural pumps:
Soft start (no inrush current damage to the motor), dry-run protection (pump stops if there’s no water, auto-restarts 30 minutes later), over-voltage, under-voltage, over-current, overload, phase-loss, high working temperature protection, and adjustable speed (frequency conversion). The controller automatically starts and stops the pump based on solar conditions. For boreholes subject to occasional dry-out, the automated retry function removes the manual reset trip — the pump tests the well itself every 30 minutes.
Unboxing & First Look
The Hybsun UPH DC submersible solar well pump kit is in a wooden box with the pump, the AC/DC solar controller, and accessories. Here’s an unboxing walkthrough showing what’s in the box and how the kit goes together:
Video by Hybsun showing the standard submersible solar well pump kit. The Hybsun 4UPH2200-105-15H hybrid solar well pump ships in the same kit format with its model-specific pump.
Who Should Buy This
The Hybsun 4UPH2200-105-15H hybrid solar well pump is sized for medium-deep wells (up to ~105 m) with daily water needs in the 58-84 m³ range. The buyer profiles below cover the most common situations where this exact pump is the right fit:
Hybsun’s solar well pump series is shared across the range — stainless steel pump bodies, NSK bearings, MPPT controllers, submersible motor topology. Where individual models differ is in power output, maximum head, maximum flow rate, and whether they include grid-AC backup. Compare across the range:
Hybsun specifies PV array sizing at a minimum of 1.3 times pump rated power — straightforward and conservative. For the Hybsun 4UPH2200-105-15H hybrid solar well pump that means at least 2860 Wp of solar panels (6-8 panels depending on individual panel wattage). The 30% additional capacity accommodates real-world PV output losses — module heat de-rating in summer, surface dust accumulation, cable resistance, gradual panel degradation — so pump output stays at the design point across the productive solar hours, not just the peak window.
The big advantage of the 4UPH hybrid controller is the wide PV voltage window compared to DC-only pumps: Best VMP 300-430 V, with maximum open-circuit voltage below 430 V. That’s a very wide operating range — wide enough that you can string anywhere from 6 panels in series up to much larger array configurations. It gives your installer real flexibility on array layout, cable sizing and longer DC runs. AC input range: 90-300 V single phase.
The Hybsun 4UPH2200-105-15H hybrid solar well pump is the high-flow workhorse of the range. Its performance curve sustains strong flow rates through the entire medium-depth band (30-75m head), with the manufacturer’s published rated point at 8 m³/h at 75m. As a hybrid pump it can also run on grid AC backup when solar isn’t producing, which roughly doubles your daily output potential for the same pump.
Here’s what the manufacturer’s performance curve shows for the Hybsun 4UPH2200-105-15H hybrid solar well pump, with daily output figures for both pure solar (6h) and hybrid mode (12h typical agricultural use including grid AC backup):
Note: The 8 m³/h at 75m row is the manufacturer’s published rated operating point (Q.Rated/H.Rated on the spec sheet) — the design point where the pump operates most efficiently. “Total dynamic head” combines three things: depth to your well’s static water surface, the friction your pipe adds across the run (allow 5-15m extra), and any vertical lift up to a discharge tank above the wellhead.
To translate flow rate into your specific water demand:
For an exact sizing calculation for your specific borehole, send CGP Solar your static water level, expected drawdown, pipe run length and storage tank height — we’ll run the head calculation and pick the right pump from the Hybsun range.
The Hybsun 4UPH2200-105-15H hybrid solar well pump is built from stainless steel and plastic — the right materials for the wet, dark, sometimes-aggressive environment inside a borehole. The stainless outer housing handles corrosive Cyprus water chemistry, and the plastic impellers/diffusers inside take abrasion from sand and silt without the wear-out you get from all-metal pump construction in the same conditions. Hybsun’s technical literature describes the construction as a “stainless steel oil cylinder” with plastic impellers — a configuration explicitly engineered for submersible commercial-duty pumping.
The Hybsun 4UPH2200-105-15H hybrid solar well pump uses NSK bearings — a Japanese industrial bearing brand favoured by manufacturers worldwide for continuous-duty rotating equipment. Combined with the alloy mechanical seal and the double-water-seal sealing arrangement, the Hybsun 4UPH2200-105-15H hybrid solar well pump is engineered for the extended commercial-duty run-times. The Hybsun datasheet emphasizes “offering the longer working life” as a core design objective — a meaningful claim for a pump operating in commercial-duty submersible service 30 to 100+ metres below ground level.
The controller has a soft-start feature that brings the motor up to speed gradually rather than slamming it on at full power. Soft-start operation avoids the high inrush current event that progressively degrades motor windings on conventional pumps across thousands of cycles — directly supporting Hybsun’s confidence in offering a 2-year warranty even on commercial-duty deployments.
If the well empties (a common occurrence during peak summer draw on agricultural sites), the pump stops automatically and self-tests the well again 30 minutes later. No manual reset, no burned-out motor from dry running. Particularly valuable for boreholes whose water level varies significantly across the year.
The AC/DC hybrid controller has features the DC-only 3UP controllers don’t carry: GPRS remote start/stop via web or phone (essential when the pump is on a remote farm you’re not on-site at), Child Lock anti-stealing (the controller can’t be tampered with by unauthorised hands — important for valuable equipment on remote sites), and an intelligent self-cleaning function. There’s also wireless long-distance auto-stop/start, which means you don’t need a physical float switch in your tank.
The big advantage of the 4UPH over the DC-only 3UP pumps: when there’s enough sun, it runs on solar. When there isn’t (clouds, sunset, winter), it switches automatically to 230 V grid AC. The pump never stops because of weather. For commercial water supply, hotels, large livestock operations and high-volume irrigation — where pump downtime would cause real problems — this is the right choice.
Submersible well-pump installation is more involved than a surface pump because the pump goes down inside the borehole. Typical CGP Solar project timeline: site survey and well assessment (2-5 days to schedule — we measure your well depth and static water level), formal quotation (about 1 week), then on-site work — lowering the pump into the borehole on rising main pipe with safety cable (1 day), PV array and controller install above ground (1-2 days), and commissioning under live solar with handover walkthrough (same day). CGP Solar handles installations across all five Cyprus districts — Nicosia, Limassol, Paphos, Larnaca and Famagusta.
CGP Solar specifies, supplies and installs the Hybsun 4UPH2200-105-15H hybrid solar well pump across Cyprus — Nicosia, Limassol, Paphos, Larnaca and Famagusta. Engagement steps: borehole assessment (depth, casing, static water level), PV array sizing to match the operational water demand, pump deployment on rising main with safety cable, hybrid controller wiring to both PV and AC sources, and full-system commissioning. Own well + sunshine + Hybsun 4UPH2200 = water for free, every sunny day.
Contact us today to schedule your personalised free consultation.
FAQ’s
The manufacturer lists H.Max as 105 metres, with a published rated operating point of 8 m³/h at 75m head — that’s the design point on the performance curve. Looking at the full curve: the Hybsun 4UPH2200-105-15H hybrid solar well pump maintains strong flow through the medium-depth band (12+ m³/h up to 50m head), then drops more steeply past the rated point (~6.5 m³/h at 90m, ~3 m³/h at 100m). The Hybsun 4UPH2200-105-15H hybrid solar well pump is the right choice for medium-depth Cyprus wells with a static water level of roughly 25-75 metres (total dynamic head 30-90m once friction is added) where you need high water volume. For deeper boreholes with lower flow needs, the Hybsun 3UP1500 reaches further depths at lower flow.
Hybsun specifies PV panel power of at least 1.3 × pump power, so the Hybsun 4UPH2200-105-15H hybrid solar well pump needs at least 2860 Wp of solar panels (6-8 panels depending on panel wattage). The PV string voltage also has to land within the controller’s MPPT range: 300-430 V Vmp, with the wide AC/DC hybrid input window (AC 80-300 V single phase, DC up to <430 V). CGP Solar designs the exact PV configuration during the quotation stage.
Yes — that’s the whole point of the hybrid version. When there’s enough solar power, the controller runs the pump from your PV array. When solar drops (sunset, cloud cover, winter), it switches automatically to 230 V grid AC and keeps the pump running. The transition is automatic — no manual intervention, no timer setup. The pump simply keeps working whenever it’s called to run.
The Hybsun 4UPH2200-105-15H hybrid solar well pump has intelligent dry-run protection. When the well empties, the pump halts of its own accord and rechecks every 30 minutes. The cycle of stop-and-retest repeats indefinitely until well water returns — operator intervention isn’t required and the motor is never at risk from running dry. Especially relevant for Cyprus boreholes that draw down through summer peak demand periods.
The Hybsun 4UPH2200-105-15H hybrid solar well pump carries a 2 years manufacturer warranty and is certified to CE (European Conformity, required for sale in the EU including Cyprus) and ISO 9001 (manufacturing quality management system). The AC/DC hybrid controller carries an IP65 waterproof rating, suitable for outdoor and exposed installations.
Only logged in customers who have purchased this product may leave a review.
Visit our show room:
Working hours:
Get in touch:
Find us on:
Reviews
There are no reviews yet.