MENU

Our company sells grid tied inverters of popular manufacturers with delivery to all cities of Cyprus. You can order certified equipment both with turnkey installation and without installation. A selection of models of hybrid, off-grid and grid tied inverters will allow you to choose the optimal solution for solar power plants of various capacities and configurations. The inverters offered at affordable prices are characterized by increased efficiency, reliability and a long service life with high stability of the output voltage parameters.

Inverter connection features

A grid inverter converts direct current electricity from solar panels into alternating current. It is used in grid solar power plants. All converted energy is transmitted to the power system. The absence of storage batteries in SPP significantly reduces its cost and makes electricity cheaper. Grid inverters differ in type, power, efficiency, functionality and other characteristics.

Consider how the efficiency of the photovoltaic system is related to the connection of the inverter:

1. If you want a high-performance solar power plant, you should choose equipment with maximum efficiency:

  • solar batteries – the highest efficiency is provided by devices based on crystalline silicon up to 22%;
  • inverters – the efficiency should be at least 95%.

2. Maximum efficiency is the level of the inverter’s ability to efficiently convert solar energy from direct current to alternating current in relation to the maximum power of the device. This is usually the first thing people pay attention to when choosing a network device. The peak efficiency of the inverter should be as close to 100% as possible to optimize the conversion of solar energy. Currently, leading manufacturers can achieve almost 99% efficiency.
There are also many cheap grid tied inverters with an efficiency below 85% on the market. Equipment manufacturers in the technical specification and on the information plate indicate test data in conditions where the efficiency has the maximum value. On average, the devices work with an efficiency lower than the passport one. This means that about 20% of the total power of the solar panels will work exclusively on the inverter. Such losses are unacceptable, especially if electricity is generated by high-performance panels.

3. Inverter loading ratio (ILR), also known as the DC/AC ratio, is an important key to optimizing the performance of PV systems. In other words, it is the ratio of the peak power of the solar modules to the maximum power of the inverter to which they are connected. Currently, average grid inverters provide a load ratio of 1.0 to 1.10. This is considered a low ratio of direct current to alternating current. High-tech and high-quality devices are able to work with a load factor of 1.2-1.3. This means that you can supply 20-30% more power than its nominal value.

4. The more MPPT inverter has, the better. Maximum Power Point Tracking (MPPT) is an algorithm used in SPPs to extract maximum power under all conditions. Clouds, increased temperature of the module, deterioration of characteristics create non-ideal conditions for generation. MPPT helps to monitor current and voltage on the photovoltaic panel. In cases where you need to install panels in multiple directions or at different tilt angles, having an inverter with multiple MPPTs helps to reduce power loss due to imbalance.

5. Inverter monitoring gives you insight into how your solar system is performing. It shows daily production and daily electricity curve, real-time data, alarms, error messages and much more. This information will be recorded from the first day of work to the present. With the help of inverter monitoring, you will be able to plan correctly the schedule of maintenance, cleaning, etc. This will help in achieving optimal benefits of SPP.

Details that must be taken into account when connecting the network inverter:

  • it requires a high level of DC input voltage to operate – rated for input from 5 to 22 solar panels connected in series. The connection of modules in series formation is also known as string;
  • a line of string connected solar panels creates a voltage level within the limits of the inverter’s requirements, allowing the device to start converting direct current electricity into alternating current. It is usually in the range of 200 to 1000 V direct current;
  • inverters with a high degree of IP (Ingress Protection Code) protect against the ingress of objects and water, which makes it possible to install them outside of the bulding closer to the panels;
  • it is optimal to install the inverter on mounting structures for solar batteries, on concrete bases or on the wall. The closer the inverter is to the batteries, the smaller the length and dimensions of the DC cable you will need. In turn, this allows you to save on losses and get a profitable system;
  • some models of inverters that stand alone – they do not need walls or structures on which they will be attached, they only require a solid surface;
  • pre-assembled inverters with single-pin DC connectors can simplify the installation process;
  • installation of inverters should be as simple as possible. Always read the instruction manual and make sure you understand it before doing anything.

Types and characteristics of inverters for solar power plants

According to the purpose, there are three types of inverters:

Grid.  It supplies the converted AC voltage to the load, and the surplus to the power system. This type of SPP works only if there is a connection to a power grid, there are no batteries in this system.

Off-Grid. This is the best option when there is no possibility to connect to the power grid, or there is a connection, but the network is unreliable. The off-grid inverter is used in autonomous systems together with solar panels and rechargable batteries.

Hybrid. Combines the capabilities of the previous two. It is a multifunctional intelligent device that diagnoses, monitors and controls the photovoltaic system. In the hybrid inverter, the settings of the parameters of consumption, accumulation and electricity supply to the power system are available.

Main characteristics of inverters:

  • general characteristics — efficiency, IP housing protection rating, set of protections, type of cooling;
  • input (direct current) – max. power, nominal / starting voltage, presence of MPPT trackers;
  • output (alternating current) — nom./ max. power and current, network type/phase, sinusoidal harmonic distortion coefficient;
  • works with rechargeable batteries (type), RB voltage range, charging curve.

Before buying an inverter, you should carefully analyze all technical details, operating modes, compatibility with other components of the power plant, prices and offers on the market.

Recommendations for choosing an inverter

To buy a grid inverter use the following tips:

1. Power

Low-power models of 0.1-1.0 kW are suitable for completing power supply systems for household networks based on 12-24V solar panels. More powerful devices from 1.0 kW, which are connected to 24V, 48V or 192V batteries, allow you to power electric motors, machine tools, and other industrial equipment.

2. Low-frequency or high-frequency

In low-frequency inverters (LFI), voltage conversion is implemented using a transformer. In high-frequency (HFI) – this task is solved by electronics. These solutions differ in the following points:

  • Efficiency in the range of 80-92% for LFI and up to 98% for HFI.
  • Electronics are more prone to breakdowns due to increased sensitivity to short circuits, overloads, voltage surges.
  • The actual energy consumption of LFI is significantly higher compared to HFI.
  • In transformer models, the charging speed of the battery is higher due to higher currents.
  • Electronic devices weigh less, and their cost is also lower.

3. Functional

Most of the offered devices have an extended set of functions. Among them are the indication of the current operating parameters, generator, additional memory, etc.

The best option for connecting the inverter is to entrust this work to professionals. Contact CGP Solar – you will save your time and money and get an efficient and reliable solar station for many years as a result.

Call us to find out more details and order a grid inverter for solar panels with delivery across Cyprus. An experienced manager will tell you about the implemented models and make a favorable offer.

Contact Us

Get Free Consultation for your solar Systems

High Efficiency HJT Module

Flexible home backup and off-grid power

Ideal for grid tied self-supply and off-grid systems