Cyprus · Above-Ground · DC & AC/DC Hybrid
Solar surface water pumps in Cyprus
Above-ground Hybsun pumps for irrigation, rural water transfer and pressure boosting from tanks, ponds and shallow sources. DC-only or AC/DC hybrid with grid backup.
✦ Hybsun authorised distributor
✦ DC & AC/DC hybrid
✦ Local warranty
Available now
Our solar surface water pumps in Cyprus
Hybsun surface pump models in DC-only and AC/DC hybrid versions. DC for pumping direct from solar panels, hybrid for round-the-clock supply with automatic grid backup.
DC-only or AC/DC hybrid?
Two ways to power a solar surface pump
Both types are available in the Hybsun range. The right choice depends on whether you need water only in daylight, or around the clock.
Solar-only DC Solar Surface Pump
Panels → MPPT controller → pump
Runs directly off solar panels with no inverter or battery
Fewer components, simpler wiring, longer service life
Lowest upfront cost and lowest ongoing maintenance
Fills storage tanks during daylight — gravity delivers water 24/7
Zero electricity cost during operation
Only pumps while the sun is shining
Best for:
Off-grid rural properties, drip irrigation of olive groves and vineyards, filling elevated tanks, farms in remote Paphos, Akamas or Troodos areas without EAC connection.
AC/DC Hybrid Solar Surface Pump
Panels + grid → smart pump (no inverter needed)
Accepts both solar DC (90–430V) and AC mains input directly
Auto-switches to grid or generator when the sun's not out
Runs day, night, cloudy weather — any hour, any conditions
Still saves on EAC bills during daylight hours
Same self-priming action and construction as the DC version
Higher upfront cost, slightly more complex install
Best for:
Greenhouses with scheduled irrigation, livestock water supply, farms with fixed schedules that must run day and night, or any operation that can’t stop at sundown.
How it works
Three components. That's it.
Simpler than a full home solar setup. No inverter, no battery, no monthly bill — just three parts that work together whenever the sun is out.
Solar Panels
MPPT Controller
Water Pump
Cyprus-wide install
Where solar surface pumps work best in Cyprus
Free delivery Cyprus-wide on all products. Installation service available across every district.
-
Paphos district
Olive groves and small farms in Polis, Peyia, Pissouri, Kissonerga, plus remote plots in Akamas where extending the grid isn't practical.
-
Limassol district
Vineyards in the Krassochoria (Omodos, Vasa, Vouni, Kilani) pumping from storage tanks to drip networks. Rural properties in the Limassol hills.
-
Nicosia district
Mixed farms across the Mesaoria plain — Astromeritis, Peristerona, Kokkinotrimithia, Lythrodontas. Suburban gardens in Strovolos and Lakatamia.
-
Larnaca district
Greenhouses and market gardens around Kiti, Meneou, Athienou, Aradippou. Elevated storage tanks fed from open sources.
-
Famagusta district
Vegetable and citrus farms in the Kokkinochoria — Sotira, Liopetri, Frenaros, Deryneia, Avgorou. Boosting supply between reservoirs and drip lines.
-
Troodos & off-grid
Pano Platres, Arsos, Agros, Vavatsinia — mountain villages, off-grid homes, agritourism sites, and any property where grid connection would cost more than the pump.
Solar surface water pumps in Cyprus Guide
Solar surface water pumps in Cyprus — everything you need to know
Solar surface water pumps in Cyprus are above-ground pumps that draw water from a nearby source — a shallow well, storage tank, pond, river or cistern — using solar power instead of grid electricity or diesel. Unlike submersible pumps that drop into a borehole, surface pumps sit above the water and pull it upwards using suction, then push it out to your irrigation system, storage tank or distribution network.
CGP Solar is the authorised Cyprus distributor for the Hybsun surface pump range, covering both DC-only and AC/DC hybrid configurations for every practical farming, off-grid and rural water use across the island.
DC-only vs AC/DC hybrid solar surface water pumps
The most important buying decision for solar surface water pumps in Cyprus is choosing between DC-only and AC/DC hybrid. Both are available in the Hybsun range, both use the same brushless permanent-magnet DC motor technology, and both deliver the same pumping action — the difference is in how the pump gets its electricity.
DC-only solar surface water pumps connect directly to solar panels through an MPPT controller. No inverter, battery pack or grid connection required. This is the simplest, cheapest and longest-lasting configuration. The pump runs whenever the sun produces enough power — typically from about 8 AM to 5 PM in Cyprus summer — and fills a storage tank that gravity-delivers water to your irrigation network or property day and night. Best for most off-grid rural properties, drip irrigation of olive groves and vineyards, and any site where a storage tank buffer solves the “water at night” question.
AC/DC hybrid solar surface water pumps accept both solar DC input (typically 90–430 V from the panels) and AC mains input (90–300 V from the EAC grid or a generator) in the same unit. No separate inverter needed. During daylight the pump runs on solar, saving on your EAC bill. When the sun’s not out — night, heavy overcast, extended winter cloud — it auto-switches to grid or generator without any manual intervention. Best for greenhouses on fixed irrigation timers, livestock water supply that must never stop, and any operation that can’t be constrained to daylight hours.
How do solar surface water pumps in Cyprus work?
Solar surface water pumps in Cyprus work by converting sunlight into electricity, which then powers a surface pump motor that draws water from a nearby water source. Let’s break it down step by step:
1. Solar panels capture sunlight
Photovoltaic (PV) solar panels are placed in direct sunlight, usually facing south in Cyprus for optimal exposure.
The panels convert solar radiation into direct current (DC) electricity.
2. Power is sent to the pump or controller
The electricity either powers the pump directly or passes through a controller that regulates voltage and optimizes performance (usually with MPPT technology).
In hybrid pumps, the controller may also allow input from the grid or a generator as backup.
3. Water is drawn by the surface pump
The surface pump uses the power to create suction and draw water from a nearby shallow source.
Depending on your system, the water is then pumped to:
Irrigation systems
Storage tanks
Livestock troughs
Gardens or domestic taps
4. Optional AC/DC hybrid surface water pump
To ensure pumping on cloudy days or at night
The controller adjusts the pump’s speed to match available sunlight and provides dry-run protection — if the pump loses water in the intake, the controller stops it automatically to protect the motor, then restarts it 30 minutes later once water returns.
The pump uses centrifugal action to draw water from the source and deliver it under pressure to wherever you need it. The whole system has three components — panels, controller, pump — and the sun does the rest.
Self-priming vs standard surface pumps — which type do you need?
Both self-priming and standard surface pumps sit above ground, but they solve different problems. Picking the right type depends on your water source, not just how much water you need.
Standard solar surface pumps — like the ones on this page — are centrifugal pumps designed for applications where the water source stays consistently at or above the pump inlet. They deliver higher flow rates than self-priming pumps at the same wattage, making them the right choice for pumping between elevated storage tanks and distribution networks, pressure boosting from a full reservoir into an irrigation system, or moving water between two connected tanks. They need to be primed manually before first use — you fill the pump body with water to start it — and if the suction line ever runs dry, they lose their prime and won’t restart until manually refilled.
Self-priming solar pumps prime themselves automatically on start-up. The pump expels air from the suction line without you filling it manually, then pulls water up from below the pump inlet (up to about 8 metres of suction lift). If the water level drops and the suction line loses water, the pump re-primes on its own once the source refills. This is what makes them practical for wells with seasonal water level changes, shallow ponds that draw down during dry months, and river-fed systems where prime could otherwise be lost. If your setup is a farm pumping from a well or open water source with a variable level, our solar pumps for agriculture may fit better than a standard surface pump.
The short version: if your water source is at or above the pump inlet (elevated tanks, reservoirs feeding downhill) and you need higher flow rates, a standard solar surface pump is the right call. If your water source is below the pump and the water level varies, a self-priming model is safer.
Hybsun surface pump build quality
Every Hybsun surface pump uses these components as standard:
- Brushless permanent-magnet DC motor — over 90% efficiency, quieter than AC induction, no carbon brushes to wear
- Iron pump body with NSK bearing and alloy mechanical seal
- Double water seal — waterproof and leak-proof
- IP65 controller protection — dust-tight and rated against water jets
- MPPT controller with dry-run protection, soft-start, adjustable speed, phase-loss protection, overload and over-current protection, over/under-voltage protection, high-temperature protection
- Optional GPRS remote control — start/stop the pump from your phone or web browser
- CE and ISO9001 certified — 24-month manufacturer warranty
Who Should Buy Solar Surface Water Pumps in Cyprus?
Solar surface water pumps in Cyprus are designed for anyone who needs reliable water access from a surface-level source—without relying on the electricity grid. They’re a perfect fit for the sunny, rural, and semi-urban conditions of Cyprus, where solar energy is abundant and electricity costs are rising. Here’s who benefits most:
1. Farmers & Agricultural Landowners
Water is essential in agriculture—but electricity and fuel costs can make irrigation expensive. Solar surface pumps provide a low-cost, off-grid solution that works beautifully under the Cyprus sun.
Ideal use cases:
Drip and sprinkler irrigation for citrus groves, olive trees, or vineyards
Pumping water from ponds, reservoirs, or tanks to crop fields
Watering greenhouses or small plots
Works even in remote farm locations like Mesaoria Plain, Akamas, or Tseri
2. Rural Homeowners or Off-Grid Households
In many parts of Cyprus—especially mountainous villages or remote areas—homes are not connected to the national grid or experience frequent outages. Solar surface water pumps in Cyprus can provide a stable water supply using only sunlight.
Ideal use cases:
Pumping water from wells, rain tanks, or nearby streams
Supplying garden irrigation, household water storage, or livestock
Reducing grid dependency or achieving total off-grid living
Suitable for homes in Troodos, Pano Platres, Arsos, and similar areas
3. Livestock & Animal Farm Operators
Animals need consistent access to clean water, and surface pumps powered by solar energy offer a reliable, low-maintenance solution for animal watering systems.
Ideal use cases:
Filling troughs from shallow wells, rivers, or tanks
Creating automatic watering stations powered by the sun
Works great for: Goat farms, poultry setups, cattle breeders, and other rural operations in Nicosia District, Larnaca hills, or Agros region.
4. Gardeners & Greenhouse Owners
Whether you’re managing a backyard garden in the suburbs or operating a commercial greenhouse, solar surface water pumps in Cyprus offer a simple and sustainable way to automate watering.
Ideal use cases:
Connecting to drip lines or micro-sprinklers
Filling water tanks during the day
Supporting rainwater harvesting systems
Popular in: Suburban homes in Lakatamia, Germasogeia, Strovolos, and residential zones near Limassol.
5. Resorts, Villas & Boutique Hotels
Solar surface water pumps in Cyprus can be a great fit for hospitality businesses seeking eco-friendly operations, landscape maintenance, or pool water circulation—especially in off-grid or semi-rural locations.
Ideal use cases:
Garden or lawn irrigation
Decorative pond or fountain water circulation
Off-grid retreat facilities in Polis, Latchi, or Vavatsinia
6. NGOs & Government-Funded Projects
Many local initiatives and EU-funded programs focus on rural water access, sustainability, and climate-resilient agriculture. Solar surface water pumps in Cyprus are an ideal solution for these goals.
Ideal use cases:
Public garden irrigation
Pilot water conservation projects
Water access for small communities
.
Installation across every Cyprus district
- Paphos district — Polis, Peyia, Pissouri, Kissonerga, plus remote Akamas plots
- Limassol district — Krassochoria wine villages (Omodos, Vasa, Vouni, Kilani), rural hills
- Nicosia district — Mesaoria plain (Astromeritis, Peristerona, Kokkinotrimithia, Lythrodontas)
- Larnaca district — Kiti, Meneou, Athienou, Aradippou greenhouses and market gardens
- Famagusta district — Kokkinochoria (Sotira, Liopetri, Frenaros, Deryneia, Avgorou)
- Troodos and off-grid — Pano Platres, Arsos, Agros, Vavatsinia mountain properties
Is There Financial Aid or Support for Solar Surface Water Pumps in Cyprus?
As of 2025, there are no direct subsidies for solar surface water pumps in Cyprus.
General Energy Resources:
What to send us for a quote
Water source type (tank, pond, river, or shallow well), distance and elevation from pump to storage or delivery point, daily water requirement in litres, whether you need water at night, and your property location. We come back with a specific pump model, panel array size and total installed price — usually within a couple of working days.
Free delivery Cyprus-wide on all products. Manufacturer’s 24-month warranty processed locally through CGP Solar in Paphos — you never ship anything overseas if a claim is needed.
Investing in solar surface water pumps in Cyprus is more than just a smart move—it’s a long-term solution to rising energy costs, water insecurity, and environmental impact. Whether you’re a farmer, homeowner, or off-grid enthusiast, CGP Solar has the tools, knowledge, and experience to help you go solar with confidence.
Want Help Choosing the Right Solar Surface Water Pump?
Let us design the perfect system for you.
Contact us via phone, email, or website form today to get your solar pump free consultation.
FAQ’s
Most asked questions
about solar surface water pumps in Cyprus
Prices vary depending on:
Pump capacity (flow rate & pressure)
Type of motor (DC or AC/DC)
System size (solar panel wattage)
Not directly—but you can extend operation time by:
Using a hybrid pump (AC/DC)
Installing a solar battery system for evening use
Optimizing water storage (pumping during the day into a tank)
Most of our customers use the pumps during peak sun hours and store water for later use.
Minimal. Our solar surface water pumps are:
Rust-resistant and durable
Equipped with brushless motors
Easy to clean and service without special tools
We recommend a quick check every 3–6 months and cleaning filters regularly.
Absolutely. In fact, solar surface water pumps in Cyprus are ideal for:
Drip systems in vineyards or olive farms
Sprinkler systems for lawns or small fields
Flood irrigation for greenhouses or orchards
If you need help with layout or sizing, CGP Solar offers free consultation.
Many smaller solar surface water pump systems are plug-and-play and easy to install yourself. However, for larger or hybrid setups, we recommend professional installation to ensure optimal performance and safety.
CGP Solar offers installation services across Cyprus and provides full guidance and after-sales support.
Yes! We serve the entire island—including Nicosia, Limassol, Paphos, Larnaca, Famagusta, and remote villages. Whether you need a small garden pump or a full-scale irrigation system, CGP Solar has you covered.
No. Hybsun DC pumps run directly from solar panels through an MPPT controller — no battery pack needed. If you need water at night, either use a storage tank (which acts as your “battery” for water) or use the AC/DC hybrid model, which switches to grid or generator when the sun’s not out.
For most residential or small farm systems, installation takes just a few hours. Larger hybrid setups may take 1–2 days. At CGP Solar, we handle everything—design, delivery, and installation—so you get a working system fast.
Yes. Even in winter, Cyprus still gets plenty of sunlight—especially in coastal regions. While output may drop slightly on cloudy days, your system will still pump water effectively. Adding hybrid pump can ensure full-year reliability.
We are always ready to help
Visit our show room:
Working hours:
- Mon-Fri 07:30 - 18:00
- Sat 09:00 - 15:00
Get in touch:
Find us on: